Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA Portal V13 Dispositivos accesibles PG/PC

Created by: yonai at: 6/25/2019 2:40 PM (12 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

6/25/2019 2:40 PM	Rate (0)
yonai Posts: 7 Rating: (0)	Hola tengo un problema con el TIA Portal V13 Cuando voy a Dispositivos Accesibles y pincho en Tipos de Interfaz PG / PC solo me Aparece teleservicio no me aparece la conexion PN / IE y no puedo conectarme por eternet a un s7 1200. Como puedo solucionarlo?. Gracias yonai Hi, I have a problem with the TIA Portal V13 When I go to Accessible Devices and click on PG / PC Interface Types only I see teleservice does not appear the connection PN / IE and I can not connect via ethernet to a s7 1200. How can I solve that?. Thank you Attachment IMG_20190622_165910[1].jpg (773 Downloads)
yonai Posts: 7 Rating: (0)	Last edited by: The Helping Hand at: 06/25/2019 14:45:29 Added translation
Suggestion To thank Quote Answer

6/25/2019 2:48 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/18/2024 Posts: 22453 Rating: (3030)	open projectview open online accesses in the left three navigate to the networkcard you use expand it start accessible nodes

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users yonai

6/27/2019 1:02 PM	Rate (0)
yonai Posts: 7 Rating: (0)	Gracias por tu respuesta. Pero en la foto veras que no me sale la tarjeta de red ni nada. solo me sale teleservice. es como si el TIA Portal no reconociera la tarjeta de red que tengo en el PC
yonai Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

6/27/2019 1:49 PM	Rate (0)
yonai Posts: 7 Rating: (0)	Gracias Por tu respuesta Pero veraas en la foto que adjunte que hago lo que me dices pero no me sale la tarjeta de red que tengo ni nada. solo sale teleservice
yonai Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

6/27/2019 2:29 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/18/2024 Posts: 22453 Rating: (3030)	ENGLISH!

Suggestion To thank Quote Answer

6/27/2019 5:29 PM	Rate (0)
Bert02 Advanced Member Joined: 5/26/2019 Last visit: 10/24/2024 Posts: 16 Rating: (0)	Hello That happens when it is not recognized that a device is connected to the network port, you can check that you have an Ip assigned to your card, or a dynamic ip. Saludos. Attachment Example.png (829 Downloads)

Suggestion To thank Quote Answer

6/28/2019 7:52 AM	Rate (0)
yonai Posts: 7 Rating: (0)	Thanks for your answer. But in the photo you will see that I do not get the network card or anything. I only get teleservice. it's as if the TIA Portal does not recognize the network card that I have on the PC
yonai Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

6/28/2019 7:57 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/18/2024 Posts: 22453 Rating: (3030)	hi, please refer to the second post. have you the ethernet card in the onlineaccess list in the projectthree? mak a screen of the online access in the project three! regards christoph

Suggestion To thank Quote Answer

6/28/2019 9:19 AM	Rate (0)
yonai Posts: 7 Rating: (0)	Thank you Bert02 for your response. I had already checked it. and the ip is fine Attachment 2.jpg (711 Downloads)
yonai Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

6/28/2019 9:22 AM	Rate (0)
yonai Posts: 7 Rating: (0)	Good morning ChristophD. It does not appear to me. Only teleservice appears. I attach a photo Attachment 3.jpg (668 Downloads)
yonai Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on