Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA V13 WinCC - can't convert the project back to V12

Created by: Remark at: 4/1/2014 11:21 AM (3 Replies)

Rating (1)

Thanks 0

4 Entries

4/1/2014 11:21 AM	Rate (1)
Remark Bronze Member Joined: 9/1/2006 Last visit: 8/1/2024 Posts: 193 Rating: (13)	Can't wait to try SP1.... We experience some serious issues with TIA V13 WinCC after upgrading to V13 and we can't convert the project back to V12 now If you are using the TIA WinCC Advanced software I would advice to stay at V12 SP1 atleast until V13 SP1 is out .... best regards, Remark
	Last edited by: CS Moderator at: 4/2/2014 4:19 PM new subject after splitting from /tf/WW/en/Posts/100855#top
Suggestion To thank Quote Answer

4/1/2014 2:27 PM	Rate (0)
TomDeWou Platinum Member Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (174)	A convert back to a previous version is not possible, but on project upgrade a copy is made, so the original previous project is still there.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

4/8/2014 3:39 PM	Rate (0)
ThaKibosh Bronze Member Joined: 5/31/2011 Last visit: 8/6/2024 Posts: 190 Rating: (31)	Can you share what the actual problems were?

Suggestion To thank Quote Answer

5/12/2014 3:51 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/12/2024 Posts: 4040 Rating: (195)	follow up question published by chanluis split to a seperate thread with the subject TIA V13 WinCC - problem in WinCC runtime error Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on