Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIP: STEP7 V13 SP1 and the setting of the default interface for online access

Created by: Denilson Pegaia at: 1/11/2015 7:48 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

1/11/2015 7:48 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	Hi, A new feature that STEP7 V13 SP1 brings is the possibility to define the default interface for online access. TIP It could be set in “Options, Settings, Online & Diagnose, Default connection path for online access → Type of the PG/PC interface + Use the default connection path for online access” Attachment defaultonline.jpg (246 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

1/12/2015 10:33 AM	Rate (0)
Davinator Gold Member Joined: 1/4/2013 Last visit: 11/17/2024 Posts: 1129 Rating: (102)	Hello Pegaia, I don't see that menu in my Step7 V13 SP1. Look at the attached file, I don't have the option of setting the default card... It is extremely interesting because EVERY TIME it asks the method for going online and it is really annoying. Thanks in advance Attachment Tia_Online.jpg (208 Downloads)
	Searching for Siemens used/new equipments ? Take a look here : https://www.ravettiautomation.com
Suggestion To thank Quote Answer

1/12/2015 4:05 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	Hi, Could you please check if in English language you have the same effect? Try to go to the property in offline mode and confirm in Help, installed software, the version that you have effectively installed, please.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

1/12/2015 6:08 PM	Rate (0)
Davinator Gold Member Joined: 1/4/2013 Last visit: 11/17/2024 Posts: 1129 Rating: (102)	Sorry, sorry sorry. I checked and my system is NOT upgraded to Service Pack 1. I am now downloading the mighty Service Pack 1 and if I will have problems I will post them. Obrigado.
	Searching for Siemens used/new equipments ? Take a look here : https://www.ravettiautomation.com
Suggestion To thank Quote Answer

1/13/2015 9:54 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	It is a pleasure to help :) you are wellcome
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

4/13/2015 2:32 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by zzohaibhl is split to a separate thread with the subject Talk to PLC 1515f 2PN. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on