Hello Everyone,

I am new to Siemens PLC and I am here to ask about why TIA Portal v13 encountered a problem when I download to PLCSIM. When "Attempting to connect to the device with address 192.168.0.1" the program freezed and then the error message popped up. Is it caused by bugs? Or are there any HWconfig fault?

By the way, when I try to compile the hardware 3 errors appearing but I don't know what the problems are.

The compilation of the hardware configuration failed (0002).,,,9:25:32 PM
The compilation of the hardware configuration failed (0202).,,,9:25:32 PM
The compilation of the hardware configuration failed (0100).,,,9:25:32 PM

Actually, I hardly know what i was doing when I set the hardware config. I just follow the instructions from my school that the upcoming ladder logic competition will be using S7-1500 CPU 1511, so i put 1511 to SLOT 1, a DI and a DQ, but the rest are pretty much blind drag&drop modules. So until now, I practice ladder using RSLogix because I hadn't understood the simatic environment yet. Please assume here that I still have zero knowledge of Siemens PLC and its programming software.

I attached error logs and screenshots of the errors. Thanks for helping me.naufalridho

Closed cause question posted twice.

The second thread with the subject TIA Portal encountered a problem when downloading to PLCSIM is published within the conference STEP 7 (TIA Portal).

Best regards
Min_Moderator