Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Totalizing a flow meter using an FM350-1

Created by: OldSchool at: 3/5/2008 12:19 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/5/2008 12:19 AM	Rate (0)
OldSchool Posts: 18 Rating: (0)	I am looking for some guidance or suggestions for using an FM350-1 counter module and a flowmeter to display/controlthe gallons dispensed into a container. I assume that I will need to scale the counts (pulses*X) into gallons and create a setpoint for when to turn off the valve. What else should I be looking at doing?
OldSchool Posts: 18 Rating: (0)
Suggestion To thank

3/6/2008 11:54 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 1/13/2025 Posts: 4114 Rating: (195)	closed cause question posted twice. The second thread with the subject FM350-1 Counting pulses from a flow meter is published within the conference SIMATIC S7-300 / S7-300F. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on