Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TP177B -4" color PN/DP Error: Image is corrupt

Created by: Pavic71 at: 7/30/2012 1:23 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

7/30/2012 1:23 PM	Rate (0)
Pavic71 Posts: 2 Rating: (0)	I have the 6AV6642-OBD01-3AX0 TP177B-4"panel and after start up i have on screen this texst: BootCE TP177B Version : 01.00.10.00 MAC: 00-1b-1b-1a-59-b8 Error: Image is corrupt Wait for image update. I try tu make reset to factory setings and after update OS with TAI V 11 SP2 on ethernet conection but is not possible to connect. Ip address of my computer is 192.168.0.170 Ip address of pannelis 192.168.0.163 I try to ping addres of panel from computer but no answer. I used MAC in Pro Save IN Control panel SET PG/PC interface I used TCP/IP Intel (R) PRO/100 VE NE... The problem is how to ESTABLISHING CONNECTION ?? Can you help. Thanks.
Pavic71 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

7/30/2012 4:47 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Do you use an IP adress in the same networkin the settings of Prosave? See the screenshot Tweety Attachment C:\screenshot.JPG (212 Downloads)
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

7/31/2012 7:48 AM	Rate (0)
Pavic71 Posts: 2 Rating: (0)	Thanks But when I want to made reset to the factory setings it is not possible to Establishing connection !! Look picture in attach. I used MAC address not IP because it is not possible swich the panel in transfer mod. Attachment Reset TP177B-4 to factory setings.JPG (246 Downloads)
Pavic71 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

7/31/2012 12:18 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 10/4/2024 Posts: 4349 Rating: (1446)	Hi, didyou alread try to reset to factory settings with a cross over Ethernet cable?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

3/28/2017 3:06 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4767 Rating: (123)	New question published by mauricio c m is split to a separate thread with the subject Help for Siemens screen. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on