Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

tp277 synch clock to s7-1214

Created by: Mel at: 10/3/2011 8:54 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/3/2011 8:54 PM	Rate (0)
Mel Bronze Member Joined: 12/27/2007 Last visit: 3/14/2023 Posts: 128 Rating: (1)	Hi all I am using TIA 11 for my project the problem I am having is the (HMI TP277) does not update the system time using the tag in the area pointer ('db_time_sync.time_system_READ') I am using tia /wincc 11 sp1 upd 2 any ideas why it does not work? Regards Mel

Suggestion To thank

10/4/2011 11:18 AM	Rate (0)
Robster Gold Member Joined: 5/28/2008 Last visit: 3/1/2023 Posts: 1343 Rating: (139)	Maybe same problem as in the other thread. Check you HMI connection first.

Suggestion To thank

10/4/2011 6:22 PM	Rate (0)
Mel Bronze Member Joined: 12/27/2007 Last visit: 3/14/2023 Posts: 128 Rating: (1)	Hi All connections to the HMI are ok all tags work ok on the HMI except the area pointer (and pid values as per myother post) the other tags on the same screen work ok. I Can Set the PLC clock from the HMIfrom the same screen which is confirmed in TIA software and the data block valueBut the HMI clock does not take the value of the plc Area Pointer Regards Mel

Suggestion To thank

10/12/2011 8:31 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 2/23/2023 Posts: 2685 Rating: (135)	Thread closed, because problem is already discussed in the following thread TP277 and pid Gain Ti and Td values. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on