Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

tranferencia of data to a DCS

Created by: Pilar at: 4/6/2006 5:27 PM (1 Replies)

Rating (1)

Thanks 0

2 Entries

4/6/2006 5:27 PM	Rate (0)
Pilar Posts: 3 Rating: (0)	Some function exists to transfer several bit to a Word. ? I need to tranferir data of a PLC 317 to a system DCS. thank you very much
Pilar Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

4/10/2006 10:43 AM	Rate (1)
J_Bell Posts: 5822 Rating: (412)	Hello Pilar, if your DCS System runs on MS WindowsXP or Windows 2000OS you could use an OPC Server to connect to the S7 300 PLC. There you could use SOFTNET S7 for PROFIBUS or Industrial Ethernet, if you have an Ethernet Interface in the PLC. If the DCS System has an OPC Interface or OLE 2.0 Interface I see no problem. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on