Navigation

Transfer HMI project to SIMATIC panel PC 677B from WinCCflex

Created by: manningcub at: 4/8/2015 2:10 PM (1 Replies)

4/8/2015 2:10 PM	Rate (0)
manningcub Posts: 87 Rating: (0)	One more question. Do I need to make GS connection in step7 when I want to transfer my HMIproject to SIMATIC panel PC 677B from WinCCflex ? ---------------------------------------------------------------------------------------------------- Split from Siemens IPC577C and CPU319-3 PN/DP, CP module and Software.
manningcub Posts: 87 Rating: (0)	Last edited by: VelaAndyyy at: 4/8/2015 3:07:22 PM Last edited by: Min_Moderator at: 4/9/2015 2:26:10 PM New subject after splitting
Suggestion To thank Quote Answer

4/10/2015 9:25 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/13/2024 Posts: 14159 Rating: (1772)	Hello VelaAndyyy No you do not have to configure a Connection in Step7 to Transfer your WinCC flexible Runtime Project to your Runtime System. You only have to start the Runtime Loader in the RT System and activate the correct Transfer channel. In the Engineering Station you have to set the pg/PC Settings in your Windows Control Panel. the Transfer is only winCC flexible Based. Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users manningcub