Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Transmission error

Created by: R.ick at: 4/26/2012 9:14 AM (5 Replies)

Rating (0)

Thanks 1

6 Entries

4/26/2012 9:14 AM	Rate (0)
R.ick Posts: 8 Rating: (0)	Hello, I try to upload my program PC --> LOGO!. But he give's an error that says "Transmission error (Timeout. LGOGO! does nos respond)" I hope you can help me. Kind regards, Rick
R.ick Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

4/26/2012 10:15 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, Please tell us more. 1. the type of Logo you have there (version OBAx) 2. how do you connect, what cable. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Out Control

5/8/2012 9:12 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, in most cases this message is based on communication settings. 1. You have selected the wrong LOGO! version in LSC. Go to Tools/Select Hardware and check if the correct LOGO! Version can run the program 2. You may have programmed FB's in the program your LOGO! does not support. Press F2 and check the status window information if your LOGO! can run this program 3. You have selected the wrong communication interface: Goto Tools/Options/Interface and check 4. With LOGO! 0BA7 you may have the wrong Ethernet Hardware selected or you try to communicate to a wrong IP-Adress. Press the upload button in LSC. In the popup windows enter the right IP-Adress of your LOGO!. Hope this helps
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

5/8/2012 9:46 AM	Rate (0)
Andres [Str] Posts: 153 Rating: (16)	[quote user="Marcjan"]Hello, Please tell us more. 1. the type of Logo you have there (version OBAx) Regards, Marcjan I think that R.i.c.k. will use the 6th series
Andres [Str] Posts: 153 Rating: (16)
Suggestion To thank Quote Answer

5/11/2012 3:19 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, I see that is based on earlier post, it's a good thing (and said many times) to make your first post in a thread as complete as possible, so with partnumbers, details about communication cables/settings, etc. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

3/15/2016 10:43 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by Stephen Curry is split to a separate thread with the subject Upload to Logo, Transmission error. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on