Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TsAdapterII with MC45

Created by: Roby at: 1/18/2007 1:08 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

1/18/2007 1:08 PM	Rate (0)
Roby Silver Member Joined: 4/10/2006 Last visit: 1/24/2025 Posts: 950 Rating: (2)	Hi! I have the new TsAdapterII connect with gsm modem MC45. The MC45 wich old TsAdapter (6ES7 972-0CA34), all ok! The MC45 with new TsAdapterII (6ES7 972-0CB35) ....bleah!!! no comunication!!! Must i change speed in to MC45 with Hyper Terminal? what can I do for to resolve this problem? Thank Roby
	Setting of my PG M6 Siemens OS: Windows 10 Enterprise 22H2; Intel(R) Core(TM) i7-8850H CPU @ 2.60GHz 2.59 GHz - 32G of RAM TIA15.1 Update 8; TIA17 Update 7; TIA18 Update 4 (i use normally)
Suggestion To thank Quote Answer

1/18/2007 8:18 PM	Rate (0)
Calm_down Posts: 324 Rating: (30)	Hi Roby, I am not sure, but I know that if you followed the steps shown in here: Commissioning TS Adapter with GSM Modules it shuld work. If it does not contact the customer support... I have heared about some problems they can check for you. I hope it will work... stay calm. [:)]
Calm_down Posts: 324 Rating: (30)
Suggestion To thank Quote Answer

1/19/2007 11:36 AM	Rate (0)
Roby Silver Member Joined: 4/10/2006 Last visit: 1/24/2025 Posts: 950 Rating: (2)	Hallo, Calm_down! A question.....can i to use the gsm modem MD720-3 also for S7-300 Cpu's? Because in the catalogue description, it use only S7-200...boh! For problem between MC45 and TsAdapteri_II, instead, i think that owe to change speed into the TsAdapter_II. I try, and i'll tell you the later.. I am sorry for my english....Thank Roby
	Setting of my PG M6 Siemens OS: Windows 10 Enterprise 22H2; Intel(R) Core(TM) i7-8850H CPU @ 2.60GHz 2.59 GHz - 32G of RAM TIA15.1 Update 8; TIA17 Update 7; TIA18 Update 4 (i use normally)
Suggestion To thank Quote Answer

1/19/2007 12:15 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello Roby, I can try to answer this too. The MD 720-3 has a serial Interface (RS 232), to use this Device with a S7-300 or S7-400 you need a serial interface, like CP 340 or CP 441-1. Also the Use of GPRS will not be possible. The only thing you could do is exchanging Data with Function blocks you will have to develop yourself, there are no available blocks for such a configuration. So you would have a really expensive solution, other solutions are much cheaper. [;)] Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

1/19/2007 12:59 PM	Rate (0)
Roby Silver Member Joined: 4/10/2006 Last visit: 1/24/2025 Posts: 950 Rating: (2)	Hallo, J_Bell thank for your help... Best Regards Roby
	Setting of my PG M6 Siemens OS: Windows 10 Enterprise 22H2; Intel(R) Core(TM) i7-8850H CPU @ 2.60GHz 2.59 GHz - 32G of RAM TIA15.1 Update 8; TIA17 Update 7; TIA18 Update 4 (i use normally)
Suggestion To thank Quote Answer

1/23/2007 12:24 PM	Rate (0)
Roby Silver Member Joined: 4/10/2006 Last visit: 1/24/2025 Posts: 950 Rating: (2)	Ok! I must to change speed into TsAdapter_II....change from 115.200 to 19200 bps... bye bye Roby
	Setting of my PG M6 Siemens OS: Windows 10 Enterprise 22H2; Intel(R) Core(TM) i7-8850H CPU @ 2.60GHz 2.59 GHz - 32G of RAM TIA15.1 Update 8; TIA17 Update 7; TIA18 Update 4 (i use normally)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on