Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Unable to upload hardware configuration

Created by: kncfer at: 2/21/2018 9:10 AM (11 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

2/21/2018 9:10 AM	Rate (0)
kncfer Regular Member Joined: 2/16/2018 Last visit: 10/11/2023 Posts: 31 Rating: (0)	In the system S7-300 2-DP is communicating via profibus with SIMOTION D (D 425) 6AU1425-0AA00-0AA0 , SINAMICS 120G, PHOENIX CONTACT and Touch Screen. I am unable to upload hardware configuration using STEP7 V5.5 SP4. (Error message 2000) I have tried with TIA PORTAL V13 as well. Same results. I could not find GSD file for the Simotion D425 to update my hardware catalog. Please advice me. Thanking you all in advance!

Suggestion To thank Quote Answer

2/21/2018 9:31 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/14/2024 Posts: 22452 Rating: (3030)	Hello, GSD can be downloaded here: https://support.industry.siemens.com/cs/ww/en/view/99523000 But it can be that the simotion is not configured with GSD, it can be a coupled i-Slave device. Then you need Simotion Scout to handle the Simotion Config. Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users kncfer

2/21/2018 10:45 AM	Rate (0)
kncfer Regular Member Joined: 2/16/2018 Last visit: 10/11/2023 Posts: 31 Rating: (0)	Dear Mr. ChristophD, Thanking you for your valuable advice. Is it possible to upload hardware configuration of the S7-300 using STEP7 5.5 SP4 (as I know, the project originally created by 5.4 or low) Thanking you.

Suggestion To thank Quote Answer

2/21/2018 11:10 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/14/2024 Posts: 22452 Rating: (3030)	Hello, yes this should be possible. If you have some errors or messages please attach a screen of it. Regards Christoph

Suggestion To thank Quote Answer

2/22/2018 10:15 AM	Rate (0)
kncfer Regular Member Joined: 2/16/2018 Last visit: 10/11/2023 Posts: 31 Rating: (0)	Dear mr.christoph, i am ataching error display while uploading. kindly advice me. thank you Attachment E95D015A-2FD5-42B9-96BA-0BC41314B151.jpeg (311 Downloads)

Suggestion To thank Quote Answer

2/22/2018 10:32 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/14/2024 Posts: 22452 Rating: (3030)	Hello, what happen if you click yes and continue the upload. Which devices/Configuration is uploaded and displayed? Regards Christoph

Suggestion To thank Quote Answer

2/22/2018 10:45 AM	Rate (0)
kncfer Regular Member Joined: 2/16/2018 Last visit: 10/11/2023 Posts: 31 Rating: (0)	Only plc rack configuration and 2 phoenix contacts are uploading. There are four G-120 and one simotion d425 and one touch screen in the same bus. They are not uploading.

Suggestion To thank Quote Answer

2/22/2018 10:51 AM	Rate (0)
kncfer Regular Member Joined: 2/16/2018 Last visit: 10/11/2023 Posts: 31 Rating: (0)	Dear mr. Christoph, i’m attaching a photo for your reference. Attachment E4876B43-3424-4E4E-8FF5-787C689B53C8.jpeg (286 Downloads)
	Last edited by: kncfer at: 2/22/2018 10:52:23 AM
Suggestion To thank Quote Answer

2/22/2018 11:14 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/14/2024 Posts: 22452 Rating: (3030)	Hello, ok in the picture there are 2 DP Slaves for which no bitmap and/or GSD was installed or Found. in the properties of this "DP Norm" any information about the type? Can you attach this uploaded Config here? Regards Christoph

Suggestion To thank Quote Answer

2/22/2018 11:42 AM	Rate (0)
kncfer Regular Member Joined: 2/16/2018 Last visit: 10/11/2023 Posts: 31 Rating: (0)	Dear mr.Christoph, please check the attachment and advice me. best regards. Attachment S7_roy.zip (423 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on