Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Unified Panel: runtime only activates the first Button that will be pressed.

Created by: mkublenz at: 6/8/2021 3:43 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/8/2021 3:43 PM	Rate (0)
mkublenz Posts: 8 Rating: (0)	Hello, I am using a Unified Panel (MTP700) and want to press two buttons at the same time. but the runtime only aktivates the first Button that will be pressed. And i don't know whats wrong. Any suggestions? ------------------------------------------------------------------------------------------ Split from How to press two separate buttons on HMI.
mkublenz Posts: 8 Rating: (0)	Last edited by: Jen_Moderator at: 06/09/2021 07:34:38 New subject after splitting Last edited by: mkublenz at: 06/12/2021 23:18:58
Suggestion To thank Quote Answer

6/16/2021 9:04 AM	Rate (0)
Fred1816 Bronze-Expert Joined: 3/3/2021 Last visit: 1/2/2023 Posts: 262 Rating: (24)	Hello mkublenz, Two-Hand-Operation is only supported with TIA V17 (unlocking the function of one button, by pressing another). Best Regards, Fred

Suggestion To thank Quote Answer

6/27/2021 12:48 AM	Rate (0)
mkublenz Posts: 8 Rating: (0)	So in TIA V16 i can only press one button at a time? And multitouch is only for TIA V17?
mkublenz Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC WinCC Unified

Follow us on