Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Upgrade PCS7 v7.1 to PCS7 v9.x

Created by: Ahmed_teb at: 4/18/2019 12:27 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/18/2019 12:27 PM	Rate (0)
Ahmed_teb Posts: 32 Rating: (2)	Hello all, I am thinking of upgrading my PCS7 v7.1 command control system to PCS7 v9.x, and I want to know what is the procedure I need to follow to make this migration: 1- licenses (update or you have to buy a new license) 2- PC stations, do I keep my current stations or I have to buy new stations Best reguard ------------------------------------------------------------------------------------------ Split from SIMATIC PCS 7 Software Updates.
Ahmed_teb Posts: 32 Rating: (2)	Last edited by: Jen_Moderator at: 4/19/2019 9:21:41 PM New subject after splitting
Suggestion To thank Quote Answer

4/18/2019 2:32 PM	Rate (0)
Thunderstorm Gold Expert Joined: 10/26/2011 Last visit: 11/11/2024 Posts: 762 Rating: (192)	To 1.: You can buy upgrade licenses. 2.: To This depends on the hardware requirements of the PCS 7 version. You will find theses requirements in the PCS 7 readmes. https://support.industry.siemens.com/cs/ww/en/view/109750097
	SIMATIC PCS 7 - Overview SIMATIC PCS neo - Overview Here you have direct access to the most important technical information and solutions
Suggestion To thank Quote Answer

4/21/2019 4:50 PM	Rate (0)
Ahmed_teb Posts: 32 Rating: (2)	Hello, please can you confirm if these stations are compatible with the version pcs7 v9.x, knowing that I want to install the windows 10 for the stations ingenieur and client, and windows server 2016 for the servers. Server:6AGA104-2CB12-0BB0 Client: 6AGA104-2AA02-0BB0 Best reguard
Ahmed_teb Posts: 32 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on