Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

upload MP377

Created by: hieutran8969 at: 3/18/2014 10:06 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

3/18/2014 10:06 AM	Rate (0)
hieutran8969 Bronze Member Joined: 11/17/2011 Last visit: 6/17/2024 Posts: 123 Rating: (1)	dear all, i have a question related to backup program of MP377. My MP377 is integrated WinAC MP. my system consist of MP377, ET200S. So my question is when i backup HMI by Prosave, do i have all component of Mp377 (including Winac hardware and program)? should i backup program of winac by step7 V5.5? thanks for your support,

Suggestion To thank Quote Answer

3/24/2014 4:21 PM	Rate (0)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 8/12/2024 Posts: 1557 Rating: (161)	Hello hieutran, if you do a complette backup you get a 1:1 copy of the panel. So every file this actual is at the panel are included in this backup. With best regards

Suggestion To thank Quote Answer

3/24/2014 7:17 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (999)	hieutran8969 ... So my question is when i backup HMI by Prosave, do i have all component of Mp377 (including Winac hardware and program)? ... No! hieutran8969 ... should i backup program of winac by step7 V5.5? ... Yes.
IBN-Service Posts: 8946 Rating: (999)
Suggestion To thank Quote Answer

3/27/2014 7:27 AM	Rate (0)
hieutran8969 Bronze Member Joined: 11/17/2011 Last visit: 6/17/2024 Posts: 123 Rating: (1)	dear all, i would like to backup all program of MP377 (HMI and winac). what should i do? thanks for your support,

Suggestion To thank Quote Answer

3/27/2014 8:58 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (999)	WinCCflexible is integrated in Step7, then archivate the project with Step7. Component configuration will not be saved, as far as I know.
IBN-Service Posts: 8946 Rating: (999)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on