Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Upload OP7 DP

Created by: Simotion at: 12/14/2010 7:06 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

12/14/2010 7:06 PM	Rate (0)
Simotion Posts: 223 Rating: (1)	I want to do an upload of a OP7 DP with prosave. Can I do it in no matter what status the panel is, or do I have to set the panel in a special status. I ask this question because I have a panel where the display does not show any text anymore, so I cannot navigate to a certain status?
Simotion Posts: 223 Rating: (1)
Suggestion To thank Quote Answer

12/14/2010 8:26 PM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 7/12/2023 Posts: 10221 Rating: (1177)	Hello, Switch power off, connect the PC to the panel, press and hold the keys 'ESC' and 'Cursor up' while switching on the power supply... Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

9/8/2014 7:27 AM	Rate (0)
Nguyen Mai Group 1 Posts: 49 Rating: (1)	Dear all, I share video which upload op7 Good luck to you!!! https://www.youtube.com/watch?v=G5KnlLTdaPU&list=UUA_3RxBHPueV0qrTi5kvAKA
Nguyen Mai Group 1 Posts: 49 Rating: (1)
Suggestion To thank Quote Answer

9/8/2014 7:53 AM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 6/21/2023 Posts: 4617 Rating: (700)	SIS AN Dear all, I share video which upload op7 Good luck to you!!! https://www.youtube.com/watch?v=G5KnlLTdaPU&list=UUA_3RxBHPueV0qrTi5kvAKA Hello SIS AN, I think our friend has solved your problem because the thread is dated12/14/2010
	Last edited by: Ste39 at: 9/8/2014 7:54 AM
Suggestion To thank Quote Answer

3/16/2015 3:10 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4794 Rating: (123)	New question published by midomshakil is split to a separate thread with the subject OP7, only message 'ready to transfer' appear. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on