Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Upload the program to the PLC - connection problems

Created by: LALITO_97_28_11 at: 10/24/2020 2:33 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/24/2020 2:33 AM	Rate (0)
LALITO_97_28_11 Posts: 3 Rating: (0)	Could someone help me, I was trying to upload the program to the PLC but it does nor appears the MPI for the connexion look. Does someone know what do I have to do? ------------------------------------------------------------------------------------------ Split from TIA Portal v16.
LALITO_97_28_11 Posts: 3 Rating: (0)	Last edited by: Jen_Moderator at: 10/26/2020 09:51:17 New subject after splitting
Suggestion To thank Quote Answer

10/24/2020 7:41 PM	Rate (0)
Heksu Bronze Member Joined: 12/12/2005 Last visit: 3/17/2024 Posts: 180 Rating: (12)	Hi Lalito, You shoud do own issue for this post and then tell what you have like equipments, cables etc... with best regards H
	"Beer is proof that God loves us and wants us to be Happy"-Benjamin Franklin
Suggestion To thank Quote Answer

10/26/2020 6:04 PM	Rate (0)
LALITO_97_28_11 Posts: 3 Rating: (0)	HI Heksu, I tried to do it several times and it does not work, could you help me directly?. I mean could you give 10 or 15 in Zoom to do it? (I have my own public account) Just I have an exam today at 4 and it ends at 6:00 or 6:30. Regards, Lalito
LALITO_97_28_11 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on