Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Using 2 or more CMK2000 Communication module

Created by: me.shakerian at: 3/27/2017 1:19 AM (2 Replies)

Rating (2)

Thanks 2

3 Entries

3/27/2017 1:19 AM	Rate (0)
me.shakerian Posts: 1 Rating: (0)	Hello, CMK2000 as Communication module between LOGO!8 and KNX protocol, only can communicate 50 objects include Analog and Digital Inputs and Outputs. Is it possible to use for example 2 CMK2000 in a line and increase its object to 100 parameter for control more Input and Output in LOGO!8? Thank you Best Regards
me.shakerian Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

3/27/2017 5:03 AM	Rate (1)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 1/19/2025 Posts: 34512 Rating: (4306)	No. A LOGO! 0BA8 can manage only 24 digital inputs (I), 20 digital outputs (Q), 8 analog inputs (AI) and 8 analog outputs (AQ).

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users me.shakerian

3/27/2017 8:15 AM	Rate (1)
Melon777 Posts: 53 Rating: (12)	Hello, unfortunately it's not possible to connect two LOGO! 8 to one CMK2000 communication module.
Melon777 Posts: 53 Rating: (12)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users me.shakerian

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on