Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Web serber / can not get start screen from client

Created by: Ssc_Mikro at: 12/16/2013 11:29 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

12/16/2013 11:29 PM	Rate (0)
Ssc_Mikro Posts: 196 Rating: (12)	Hi I have PCS7 V8 system with a web server where I have some challenges when I publish the pictures I get my server start screen on the web clients, instead of the start screen for a client including plant hierarchy. I think it has something to do in with order I publish the pictures, but for some reason I always end up with my server as the start picture I will be happy if somebody can explain my how to publish the picture so I get the client screen as start screen My setup is 1 ENG station 1 SERV01 5 Clint 1 Web SRV. Merry Christmas
Ssc_Mikro Posts: 196 Rating: (12)
Suggestion To thank Quote Answer

12/17/2013 12:38 AM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Hi Ssc_Mikro, Do you mean the start screen @Welcome.PDL which gets displayed the first time you activate runtime? With publish, allPDL's in the server get published by default (\\Computer\WinCC_Project_OS(1)). So if you want different start screens in server and client, copy @Welcome.PDL from client to server, publish and then restore the server start screen. Regards
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

12/17/2013 10:59 PM	Rate (0)
Ssc_Mikro Posts: 196 Rating: (12)	Hi Phantom75 I found out what the problem was, the start screen was set to my server start screen ([servername]@screen.pl_) instead of my client start screen (@screen.pl_) I change it under the user management in WinCC, have to be set for all web users.
Ssc_Mikro Posts: 196 Rating: (12)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users S_Moderator

|

Share this page:

Share this page on...

Follow us on