Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

What is Z memory area

Created by: Gabriel_W at: 7/8/2024 8:36 AM (2 Replies)

Rating (1)

Thanks 2

3 Entries

7/8/2024 8:36 AM	Rate (0)
Gabriel_W Joined: 10/9/2023 Last visit: 9/5/2024 Posts: 28 Rating: (0)	Hello, I am new in Simatic Manager Step 7 and I need to use a counter "Z_VORW". The data-type of the counter is in the Z memory area but I don't know what it is and how can use it. Somebody can help me ? Thanks

Suggestion To thank Quote Answer

7/8/2024 8:53 AM	Rate (1)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 8/30/2024 Posts: 3943 Rating: (585)	Hi, S7-300 has internal counters - check technical Data of your PLC to find out how many counters are possible. Check Screenshot vor exmaple "%Z1" means "Counter 1" / "Zähler 1" (German). Regards, Towome Attachment Zähler1.PNG (69 Downloads)
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Gabriel_W

7/8/2024 9:20 AM	Rate (0)
Gabriel_W Joined: 10/9/2023 Last visit: 9/5/2024 Posts: 28 Rating: (0)	Thanks for your help, it's working. Best regards

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Towome

|

Share this page:

Share this page on...

Follow us on