Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC 6.2: Error for Graphic Editor starting.

Created by: Sharx at: 11/29/2007 10:37 AM (8 Replies)

Rating (0)

Thanks 0

9 Entries

11/29/2007 10:37 AM	Rate (0)
Sharx Posts: 5 Rating: (0)	Hi All! The problem is described in Subj. Attachment WinCC_Graphic Designer Error_1.JPG (110 Downloads)
Sharx Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

11/29/2007 11:39 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, see FAQ below for the explanation http://support.automation.siemens.com/WW/view/en/22681687 April
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

12/8/2007 9:34 PM	Rate (0)
barisdonmez Posts: 3 Rating: (0)	Hi Sharks; I have the same problem with you. There is not enough information about that. Can you let me know when you solve the problem. Baris DONMEZ bdonmez@ostek.com.tr
barisdonmez Posts: 3 Rating: (0)	Last edited by: barisdonmez at: 08.12.2007 21:36
Suggestion To thank Quote Answer

12/9/2007 7:17 AM	Rate (0)
Dec Gold Expert Joined: 5/19/2006 Last visit: 10/23/2024 Posts: 549 Rating: (107)	I think the message has to do with MS VBA component instalation under WinCC. It might not be installed corect or some registration info (registry clsid iid etc) have been corupted. Do you have MS-office installed? If yes can you lunch VBE (Tools -> Macro -> VBE)? Dec

Suggestion To thank Quote Answer

12/10/2007 10:28 AM	Rate (0)
Sharx Posts: 5 Rating: (0)	Hi, Dec! I have MS -office 2007 installed and can lunch VBE - see my screenshot atached. And I have no error messages during WinCC installation. Simillar problems we have had on other PCs with WinCC Flexible installed (with MS Office 2003). To April: Thanks for your shortcut, but this FAQ not explains our problem (see the previous screenshot). To Barisdonmez: I agree with you concerning "is not enough information" and this problem is still. But I hope for more informations from Siemens Experts what can we try for solving (besides reinstalling clear Windows XP and after that reinstalling all installed software). Attachment VBE in MS Office.JPG (90 Downloads)
Sharx Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

12/10/2007 5:32 PM	Rate (0)
barisdonmez Posts: 3 Rating: (0)	Hi Dec; Thanks for your help. I installed MS Office 2000 now and cant launch VBE. How can i solve the problem now? Thans a lot...
barisdonmez Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

12/11/2007 11:30 AM	Rate (0)
Danielle Posts: 1275 Rating: (123)	Hi, If the problem's not yet well documented you can always create a Support Request, and you'll get an answer! For that, just access the "Support Request" link on the right, at the top... Siemens has some excelent teams who can get you a final answer! If you do that, please post the support's answers here, since it may help others in the future... Best regards, Danielle
Danielle Posts: 1275 Rating: (123)
Suggestion To thank Quote Answer

12/11/2007 10:11 PM	Rate (0)
Dec Gold Expert Joined: 5/19/2006 Last visit: 10/23/2024 Posts: 549 Rating: (107)	Well WinCC v6.2 use VBA6.4 (Office2003 SPx). I would suggest you before reinstall the OS and all the software again,go get WinCC DVD and open a command prompt CMD and type: msiexec.exe /i E:\WinCC\setup\Products\VBA_Redistribution\VBAOF11_x.msi /qb when finish type again: msiexec.exe /i E:\WinCC\setup\Products\VBA_Redistribution\VBAOF11I_1033.MSI /qb I assumed E: is your CD/DVD Driver letter; if not changed accordingly. Dec
	Last edited by: Dec at: 11.12.2007 22:40
Suggestion To thank Quote Answer

12/14/2007 1:52 PM	Rate (0)
barisdonmez Posts: 3 Rating: (0)	Hi Dec; I am using WinCC V6.0 SP2 and it doesnt contain theese files. But I solved the problem by installing WinCC from a different CD. I think the CD can be demaged.(Full program is PCS7 V6.0) Thanks for your helps. Baris DONMEZ
barisdonmez Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on