Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC 7.0 and ethernet connection to S7-400 by CP 1613 A2 card

Created by: vidarv at: 11/12/2009 9:59 PM (1 Replies)

Rating (1)

Thanks 1

2 Entries

11/12/2009 9:59 PM	Rate (0)
vidarv Posts: 66 Rating: (1)	WinCC 7.0 RC installed on a workstation with Windows Vista, Can anyone give me a link to how to set up or even better give me a simple step by step guide on how to set up the CP 1613 A2 card for the communication to the PLC?
vidarv Posts: 66 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users JadeFalcon

11/12/2009 10:40 PM	Rate (1)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 9/3/2024 Posts: 1525 Rating: (159)	Hi Viderv, Here is the link where you can find the detailed explanation for CP1613 A2 connection with WinCC (Please refer the PDF) with fault-tolerant S7 connection. http://support.automation.siemens.com/WW/view/en/16667714 It will help a to solve your problem.
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on