Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC flex 2008, invisible buttons have visible edge on the screen or in runtime.

Created by: Adrian.Stefanik at: 1/26/2011 11:58 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

1/26/2011 11:58 AM	Rate (0)
Adrian.Stefanik Posts: 1 Rating: (0)	Hallo all, I havethe following problem: I created many invible buttons with the same properties. The only difference between them is size and position on the screen. But some of them are visible on the screen when I transfer my project into HMI or run it in the RunTime (they have a visible edge). What I can do to solve this is delete the button, make it again, type all the properties like before and then it is invisible, but... his neighbour that was invisible before is gets now visible edge. AthougtI haven't done anything with his properties! On this way I cannot get all of them really hidden. It looks like some auto selection or something is active and selects my following object (?), but I cannot find the real answer how to deselect all of them. System: WinCC flexible 2008 SP1 I would be appreciated for help! Regards!
Adrian.Stefanik Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

1/26/2011 12:46 PM	Rate (0)
fbelic Silver Member Joined: 2/17/2009 Last visit: 12/1/2020 Posts: 327 Rating: (28)	Greetings Set "Properties"->"Focus width" to 0 for every invisible button. Best regards

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AdrianStefanik

1/26/2011 2:16 PM	Rate (0)
AdrianStefanik Posts: 1 Rating: (0)	Thank you, It worked, now I'm going to find out what is that "focus", and how to use it, because that was definitely the reason of my problem. Best regards!
AdrianStefanik Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

1/26/2011 3:07 PM	Rate (0)
fbelic Silver Member Joined: 2/17/2009 Last visit: 12/1/2020 Posts: 327 Rating: (28)	Heh, focus is not the problem, it's just it.. http://en.wikipedia.org/wiki/Focus_(computing) Best regards

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on