Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Wincc Flexible 2007 (schneider modicon m340 - structures(faceplates))

Created by: nedpas1 at: 12/23/2008 9:45 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/23/2008 9:45 AM	Rate (0)
nedpas1 Posts: 14 Rating: (0)	Hi. I'm working on a project with wincc flexible 2007scada and modicon m340plc. I want to make one faceplate. I am able to make faceplate for siemens s300/s400 plc. When I try to make one data structure for an non siemens plc, I can choose only internal structure or siemens s7 s300/s400 structure from a drop down menu in new structures window. How can I make connection with non siemens plc and my faceplate. Best regards Ned Attachment forum.JPG (164 Downloads)
nedpas1 Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

12/23/2008 12:09 PM	Rate (0)
ZAK Gold Member Joined: 5/8/2006 Last visit: 2/22/2023 Posts: 1085 Rating: (77)	Hi, you cannot create a structure for a non SIMATIC plcs. You can only use single tags/properties for your faceplate. Maybe this faq will help you: http://support.automation.siemens.com/WW/view/de/24256006 Bye
	Last edited by: ZAK at: 12/23/2008 12:09 PM
Suggestion To thank Quote Answer

12/23/2008 12:58 PM	Rate (0)
nedpas1 Posts: 14 Rating: (0)	O.K. Thank you very much. It was helpfull Marry Cristmass
nedpas1 Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on