Navigation

WinCC Flexible

Created by: yakin28 at: 10/20/2009 6:26 AM (1 Replies)

10/20/2009 6:26 AM	Rate (0)
yakin28 Posts: 3 Rating: (0)	Hi There, I have a 414H redundant system with 2 HMI's connected via profibus. When accepting an alarm on one screen, it won't accept alarm on other. I have been advised to use AlarmS in S7, but I'm sure there must be away of transfering the acknowledge bit between both HMI's. I also need to create a 'Silence' button within the alarm page so that I can silencean external audible alarm. Can you advise. Thanks Chris
yakin28 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

10/20/2009 9:02 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/19/2024 Posts: 8770 Rating: (1171)	Hi, Perhaps this link, might help: how can I acknowledge alarms in WinCC flexible via the PLC? Best regards, Wizard

Suggestion To thank Quote Answer