Industry Online Support
Technical Forum
Navigation
wincc professional v14 - Tried to simulate the project with the simulator and just displays the new archive values.
Created by: NADER BHS at: 6/30/2017 1:02 PM (2 Replies)
Rating 
Thanks 0
3 Entries
| 6/30/2017 1:02 PM | |
|
Posts: 85 Rating:
|
Hello, Same thing happened to me. I'm using wincc professional v14. When I tried to simulate the project with the simulator, it just displays the new archive values. Would you please confirm that the problem is solved when you tried the project with the RT. Best regards. ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 6/30/2017 2:14:22 PMNew subject after splitting |
|
| 6/30/2017 4:54 PM | |
Joined: 9/27/2007 Last visit: 12/18/2020 Posts: 993 Rating:
|
Dear nader_BHs_cmi, can you give us a screenshot of your simulation and configuration? With best regards cumulus |
Last edited by: cumulus at: 6/30/2017 4:54:40 PMLearn more about visualization - visit the HMI courses of Siemens AG! |
|
| 7/1/2017 12:49 PM | |
|
Posts: 85 Rating:
|
Hello, Please see attachment to have an idea about my configuration. The problem is when I restart the simulation all the trends in my project don't show the value archived they just show new values starting from the last restart of the project simulation. Regards. AttachmentLOG.zip (165 Downloads) |
Last edited by: nader_bhs_cmi at: 7/1/2017 12:53:13 PM |
|
Follow us on