winn cc 7.0 sp3

thank you Daniel for your help and interest

first As I told you I have bad knowledge of win cc so kindly could you tell me select … press... 

don't know if I could explain the problem to you this is old project I just try to setup it and run as was in the old hard disk I bought new hard and after some tutorial I succeed to  make the connection work after the program in runtime mode the old operator told me here was button or when he push it the project men its normal and work the currant situation this button cant push the project told in the runtime mode not available .

so I want to recover or run the project and the  primary  sequence button be start instead not available and the secondary sequence button too as show in the upload file there are some thing wrong .

so please kindly tell me in steps or what i should do  take into consideration my bad knowledge of win cc 

thank you again for your consideration and your kind interest 

in addition maybe I setup wrong sematic .NET version cues this problem ? or I missed some setup program  

my cpu I think s 7300 I connected via tsp/ ip  the project can control in some unites in the plant now stop start but in normal there are primary and secondary sequence stage after the operator push the button all equipment start work step by step and the project now alarms many alarms .

I hope I could explain to you what is the problem 

Hello wael;

I am sorry to say that it seems that you do not seem ready to take on such a project, especially if it is a rush and priority problem. You ask many questions that need someone familiar with your plant setup and your PLC/WinCC program to find out the answers quickly and efficiently. On the forum we are not able to give you answers to the questions you ask, because we do not have the documents and the files to work with.

At this point I would recommend you bring someone to help you who has knowledge of the PLC/WinCC programming environment and of your plant. Is there someone in your plant who fits this bill? Can you bring in a local integrator to examine your situation and provide solutions? Can you reach out to Hascon Engineering, whose name and logo appear in all the screenshots you show and seem to be the original programmers of the WinCC project?

If you need help finding local Siemens integrators, open the Contact & Partners link at the right of this page and search by country to find personnel close-by to your location. Hascon Engineering is located in Italy, and some contact numbers are available in this LinkedIn page:

https://www.linkedin.com/company/hascon-engineering-spa/about/

Hope this helps,

Daniel Chartier

Dear Mr Daniel thank you for your help ,

but anyway we cant contact hascon for many reasons … any way I need your help I think you can do 

the project is lost and the only copy its this CD .

the first problem now when run the project many alarms … I think its not real alarms duo to one of this alarm is very high temperature the filter but in the real no temperature is there   ,..  mybe that is old message cues this copy is backup of the project ….? if its right how I can fix it ..

second I can control with all button I can stop the motor and run it but 

the project contain button start stop its the main button in the project to start the project in sequence this button show now its not available message . .. what do u think the reason . cues its backup files ?

thank you again for your help