Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinnCC runtime block problem

Created by: PCS 7 at: 6/24/2014 1:40 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

6/24/2014 1:40 PM	Rate (0)
PCS 7 Bronze Member Joined: 9/2/2013 Last visit: 11/5/2024 Posts: 128 Rating: (0)	Hi, I have experiencing minor problem in our operator station block icon. Normally, block icon in the operator station, the tag name are not shown and hidden, this only shows up when I click the block icon itself. But now all the block icons are showing the tag name which are very confusing for the operators. Can anybody help me how to hide again this tag name and will only show up when it was click? Hope you can give me some suggestion. Regards,

Suggestion To thank Quote Answer

6/24/2014 2:28 PM	Rate (0)
Ralfinio Posts: 567 Rating: (107)	Hi, in tag management off WinCC explorer you could findthetag"@APLShowTag". The value shoud be "0" than the tags are not shown.
Ralfinio Posts: 567 Rating: (107)
Suggestion To thank Quote Answer

6/24/2014 5:08 PM	Rate (0)
PCS 7 Bronze Member Joined: 9/2/2013 Last visit: 11/5/2024 Posts: 128 Rating: (0)	Hi, thank you for your response. I need to open wincc explorer and click the tag management on the leff lane? After clicking it I can see the tag name you mentioned? Kindly elaborate further please? Thanks.

Suggestion To thank Quote Answer

6/24/2014 6:49 PM	Rate (0)
jumo Bronze Member Joined: 11/16/2012 Last visit: 3/22/2024 Posts: 227 Rating: (31)	Hi PCS 7, open the WinCC Configuration Studio by clicking 'tag management'. You will find the tag '@APLShowTag' in 'Internal tags'. To see the value of the tag: FAQ Regards jumo

Suggestion To thank Quote Answer

6/24/2014 7:11 PM	Rate (0)
PCS 7 Bronze Member Joined: 9/2/2013 Last visit: 11/5/2024 Posts: 128 Rating: (0)	Hi, Thanks everybody for your support. I will give it a try tomorrow....

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on