Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

wiring of two plus four wires DC motor shaft encoder

Created by: alfeturi at: 12/31/2013 12:27 PM (1 Replies)

Rating (0)

Thanks 1

2 Entries

12/31/2013 12:27 PM	Rate (0)
alfeturi Posts: 8 Rating: (0)	Dear sir could you help me for wiring of two plus four wires DC motor shaft encoder and how could use the signal for position control
alfeturi Posts: 8 Rating: (0)	Last edited by: CS Moderator at: 12/31/2013 3:27 PM new subject after splitting from /tf/WW/en/Posts/80650#top
Suggestion To thank

12/31/2013 3:30 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/18/2024 Posts: 4113 Rating: (195)	closed cause question posted twice. The second thread with the subject Connect and make program for encoder with 2 puls 4 wires to seimens PLS S7-300is published within the same conference. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank
This contribution was helpful to 1 thankful Users aminz

|

Share this page:

Share this page on...

Follow us on