Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ProAgent and Step View for Windows 10

Created by: Kevin Human at: 12/14/2021 7:08 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/14/2021 7:08 AM	Rate (0)
Kevin Human Member Joined: 6/12/2016 Last visit: 9/9/2024 Posts: 1 Rating: (0)	I am installing Step 7 v5.6 and WinCC Flex 2008 SP5 Update 2 on Windows 10. With Windows 7 running WinCC Flex 2008 SP3 Update 4, it was possible to activate ProAgent in the Diagnostics tab in the Wincc Flex and this allowed the use of Step View from the Enhanced Objects Library. Is it possible to activate ProAgent and Step View in WinCC Flex 2008 SP5 Update 2 in Windows 10? Attachment WinCC Flex ProAgent and Step View.JPG (532 Downloads)

Suggestion To thank Quote Answer

12/14/2021 9:14 AM	Rate (0)
itafusna Silver Member Joined: 2/17/2020 Last visit: 11/14/2024 Posts: 1121 Rating: (206)	Hi Kevin Human, please try to follow this FAQ to reset WinCC Flexible to its original state.
	A rating will be well appreciated.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on