Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC Flex2008SP5 "Softbus Not Connected"

Created by: Supawatt at: 11/6/2020 10:06 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/6/2020 10:06 PM	Rate (0)
Supawatt Posts: 1 Rating: (0)	Hello, I am having an issue with WinCC Flex 2008 SP5. In the Communication Connections, the softbus show "Not Connected". Please see the attached picture. How can I make it connected? Thank you very much. Best, Supawatt Attachment HMI_Softbus_NotConnected.PNG (642 Downloads)
Supawatt Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

1/7/2022 8:41 AM	Rate (0)
Tobias Korn Regular Member Joined: 8/11/2021 Last visit: 11/6/2024 Posts: 1 Rating: (0)	Hi, for me it worked to click "Connections" in the HW Config. Then right click on WinCC Component and select "Add new connection". In the new window popping up i selected PLC and then clicked the "Add" button. The result is that a new connection is visible in the HMI connections. Greetings Tobias Attachment HMI Verbindung.PNG (462 Downloads)

Suggestion To thank Quote Answer

1/10/2022 3:08 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/13/2024 Posts: 14165 Rating: (1774)	Tobias Korn Hi, for me it worked to click "Connections" in the HW Config. Then right click on WinCC Component and select "Add new connection". In the new window popping up i selected PLC and then clicked the "Add" button. The result is that a new connection is visible in the HMI connections. Greetings Tobias Hello Tobias, I Think you cannot compare your Solution (TIA Portal) to the Way in WinCC flexible with Simotion PLC. I would check the FAQ: https://support.industry.siemens.com/cs/ww/en/view/24109937 Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on