5/31/2022 12:36 PM | |
Joined: 8/25/2007 Last visit: 9/8/2024 Posts: 18 Rating:
|
It is solved... yes it was license problem but i have new problem now sorry I can not open integrated screen from SIMATIC Manager ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 05/31/2022 12:54:56New subject after splitting |
|
5/31/2022 1:28 PM | |
Joined: 4/24/2006 Last visit: 9/6/2024 Posts: 8735 Rating:
|
Hello, Perhaps this link might help: How do you integrate a WinCC flexible project in STEP 7? Have you integrated WinCC flexible into STEP 7? Best regards, Wizard |
This contribution was helpful to
1 thankful Users |
6/24/2022 2:20 PM | |
Joined: 8/3/2009 Last visit: 9/6/2024 Posts: 13594 Rating:
|
Hello PolaNanElias I would reintegrate the Project like: https://support.industry.siemens.com/cs/ww/en/view/80919613 and then do a Reset of the Caches: https://support.industry.siemens.com/cs/ww/en/view/36645252 Then try again Bye Murof |
If this Information really helps, you could use the Rate function |
|
Follow us on