Where is saved the data logs when I simulate the project in compter?

I have a project in WinCC Flexible 2008 that is installed in a MP370 panel and it saves a data log in the SD card (\storage card 2\).

I want to copy this file in a shared folder.  This is the script:

Dim fso

Dim Path1, Path2

Path1 = "\storage card 2\temperaturas0.CSV"

Path2 = "\\LRGTS01\LecheRio\temperaturas0.CSV"

Set fso = CreateObject("FileCtl.filesystem")

fso.filecopy Path1 , Path2


'para log. Ver los registros en system alarms.
If Err.Number <> 0 Then

ShowSystemAlarm "error: " & CStr(Err.Number) & ", " & Err.Description

Err.Clear

End If

To test if it works, from WinCC Flexible application I run the project with the button "start runtime system".

The problem is that the file is not copied.

I guess the problem is because of the code, because if I set in the data log to save the data log in the shared folder it works.

My doubt is that how it runs in the computer, perhaps the source path is not \storage card 2, but I don't know where is saved the data log when I run the project in computer. Perhaps C:\SomeFolder\temperaturas0.csv?

But I know that the file is called temperaturas0.csv because it is the name that is used if I configure the data log so save the log in the shared folder directly.

So in sumary, I would like to know how to copy a file from the SD card of the panel to a shared folder. And how I can test it running it in computer.


Thanks.