Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication between S7 CP342-5 and S5 CP5431

Created by: Loulou at: 6/21/2006 1:55 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/21/2006 1:55 PM	Rate (0)
Loulou Posts: 2 Rating: (0)	Hi all specialists, I have to link an existing S5-155 with a S7-315 2DP by the mean of a CP5431and aCP 342-5 modules. We have to transfer only few signals in both directions. I asked all around but nobody could give any tips. Who can help me? It would be great to have the settings and program example for both stations What about the communication cable configuration Thanks for reply Loulou
Loulou Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

6/21/2006 7:58 PM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 11/19/2024 Posts: 4353 Rating: (1452)	Hi, You can use FDL protocol. You can find examples in the Web version of Simatic Net Quick Start CD: https://www.automation.siemens.com/net/quickstart012003/html_76/s5-beispiele/profibus/profibus_fdl.htm
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

6/22/2006 11:27 AM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello Loulou, I found the following samples on a Quickstart CD from 2000. Maybe they can help you. Best regards J_Bell Attachment S5 - S7.zip (880 Downloads)
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

7/11/2006 5:16 PM	Rate (0)
Loulou Posts: 2 Rating: (0)	Hello Pegaia, Tank's a lot for your quick answer. I had to travel by the customer (Siberia) the day after you replied to my question. I'm by the customer and have achieved the commissioning with the link of our station to that (old) S5. I followed the instructionsyou sent me and the communication works well now. You helped me very much. Thank you again [:)] Best regards from Kraznoyarsk (Siberia) Loulou
Loulou Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on