Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

"Unable to find corresponding object" - HW Config

Created by: khedov at: 1/27/2014 3:43 PM (6 Replies)

Rating (2)

Thanks 1

7 Entries

1/27/2014 3:43 PM	Rate (0)
khedov Posts: 6 Rating: (0)	hi, I have a Profinet IO System with several devices on a WinLC RTX F. When i "save and compile" apears the "Unable to find corresponding object." The error is correct has you can see in the attachment, the adress from IW 1640 is not attached to any device. Since the device is no longer there. How can i free up this adresses? Thanks, Attachment ProfinetError.JPG (1085 Downloads)
khedov Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

1/28/2014 9:44 AM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 10/18/2024 Posts: 1921 Rating: (136)	Hello, I recommend to use the function "Station > Consistency Check" in the hwconfig. In this case you will receive the complete error number. Click in this case on the "Detail" button and you will receive the error text for your support. Otherwise I recommend also to use the function "Check Block Consistency..." in the SIMATIC Manager. With best regards Cicero

Suggestion To thank Quote Answer

1/28/2014 10:49 AM	Rate (0)
khedov Posts: 6 Rating: (0)	When I open the project the message in the attachment appears. Attachment OpeningProjectError.JPG (1242 Downloads)
khedov Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

1/28/2014 10:57 AM	Rate (0)
khedov Posts: 6 Rating: (0)	When i made a consistencyCheck the errors appears like the attachment. I know what is the problem. Is that the address like 1640 belonged to a device that doesn´t exist anymore. And during the saving process some problem occurred I´m looking for a away to fix this without making a new project. Thanks Attachment ConsistencyCheck.JPG (1124 Downloads)
khedov Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

1/28/2014 1:11 PM	Rate (0)
smoky Experienced Member Joined: 8/15/2011 Last visit: 9/9/2024 Posts: 145 Rating: (13)	Hello, try to saveyour projectlike: save as... with reorganization.

Suggestion To thank Quote Answer

1/29/2014 1:11 PM	Rate (1)
TomDeWou Platinum Expert Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (174)	smoky Hello, try to saveyour projectlike: save as... with reorganization. Save as with reorganization should help solving this issue without recreating everything manually.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

11/9/2022 4:45 PM	Rate (1)
AutoGen_2151522 Joined: 10/7/2022 Last visit: 3/2/2023 Posts: 2 Rating: (3)	As this is one of few places you find with Google for "object was not found" issue in the hardware configuration and Net Pro. I want to share the solution here. I found the solution here in the list. It was very hard to find with Google. https://cache.industry.siemens.com/dl/files/453/770453/att_117322/v1/step7_errorcode_e.pdf Error: 256:31 in the hardware configuration: Error text: This object was not found. Cause: An object that fulfills the criteria specified is not available. The function triggered cannot be executed. The assignments in the OFFLINE database with regard to the HW configuration are no longer consistent. Solution: You can reorganize the addresses with key combination Ctrl + Alt + F11 in the hardware configuration.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tamilarasan__TML

|

Share this page:

Share this page on...

Follow us on