Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Question : Masterdrive MC Plus with OPC

Created by: WaRdY at: 8/1/2006 12:22 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/1/2006 12:22 PM	Rate (0)
WaRdY Posts: 6 Rating: (0)	Hello ppl, im new at this forum [:)] and a newb with the Masterdrive inverter [:P] . I have a question, and i hope someone can help me with this : i bought the CBP2 couple of days ago, and since thenihave triedto make the connection between the CBP2 and the OPC server. I can read the statustelegram (Zustandswort), which my Slave (Masterdrive) sent to the Master(CP5611), but somehow i cant send the ordertelegram (Steuerwort) to my Slave back.Or maybe i did it wrong? How do the Ordertelegram look like, example : if i only want to start my Motor with 500 rpm. Im using OPC Scout for getting or sending the telegram. I already did the same things on Micromaster 440, and it works fine. So i thought, it would be also the same with Masterdrive... but unfortunately its not [:(] I appreciate all answer,help and opinions [:D] and sorry for my bad english. Best Regards, Wardy
WaRdY Posts: 6 Rating: (0)
Suggestion To thank

8/2/2006 8:43 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/13/2024 Posts: 4113 Rating: (195)	Closed: cause thread was posted twice. The other thread you can find here: Question: Masterdrive MC Plus with OPC Server.
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on