Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Popup windows in ProTool

Created by: hmdias at: 1/15/2007 7:25 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

1/15/2007 7:25 PM	Rate (0)
hmdias Posts: 18 Rating: (0)	Hi, I'm developing an app on a touch panel TP270 and I want to use a popup window with controls when I press a button. Is that possible? Thanks, hmdias
hmdias Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

1/16/2007 9:31 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, in ProTool unfortunately faceplates are not available, this feature comes WinCC flexible. You could just create a second page in ProTool, which e.g. contains a textfield and a button and will be shown in case that you want a show a Popup-window. After pressing the button this screen will be closed and switched to the original screen/page again. nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

1/16/2007 9:55 AM	Rate (0)
hmdias Posts: 18 Rating: (0)	I've thought in that solution too, but still I wanted to know by an expert if that function would really exist in Protool. Thanks by the tip Nemo! Best regards, hmdias
hmdias Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

1/16/2007 12:36 PM	Rate (0)
Aret Posts: 2348 Rating: (264)	You can organize window with your button and Enable/disable them with tag (ex. Show_popup) on the top layer (i mean it's situated above all objects in screen). Then when you press a button you set Show_popup=1. When you press "Ok" in that popup window you make some actions+set Show_popup=0. When you change the screen or press "Cancel" you simply set Show_popup=0.
Aret Posts: 2348 Rating: (264)
Suggestion To thank Quote Answer

1/16/2007 5:30 PM	Rate (0)
hmdias Posts: 18 Rating: (0)	Hi Arpet, Thanks for the solution you provided!I'm working on it right now! Best regards, hmdias
hmdias Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on