Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Acoustic signal in ProTool/Pro

Created by: alloger at: 4/26/2007 5:13 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/26/2007 5:13 PM	Rate (0)
alloger Posts: 2 Rating: (0)	I need to activate the internal loudspeaker of the PCfor commands in ProTool. Sonorous alarm of warning Thanks Tengo una aplicacion en ProTool con la cual necesito activar una señal acustica en el PC ya que el automata esta fuera de la habitacion y no le puedo conectar ningun avisador acustico. La idea es crear una alarma sonora cuando se active una marca en el PLC. Saludos
alloger Posts: 2 Rating: (0)	Last edited by: alloger at: 27.04.2007 10:25 Last edited by: alloger at: 26.04.2007 17:16
Suggestion To thank Quote Answer

4/27/2007 1:56 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi I just have a workaround: start a separate program by script, which e.g. is playing a sound. nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

5/3/2007 6:14 PM	Rate (0)
alloger Posts: 2 Rating: (0)	Hi I don´t understand much about the issue. Can you specify more? Thanks
alloger Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

5/5/2007 11:05 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi perhaps this FAQ helps: http://support.automation.siemens.com/WW/view/en/13884132 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on