Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinAC Slot 416

Created by: BobK at: 12/19/2006 11:42 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/19/2006 11:42 PM	Rate (0)
BobK Posts: 1 Rating: (0)	I have noticed that the WinAC Slot 416 (V 3.4.1)will fail with all four LEDs flashing (R, S, SF, BF). When this happens, I need to reset the board and reload the S7 PLC logic (I'm using a 256Kb Memory card with a battery backup). Has anyone else had this happen? What does it mean when all 4 LEDS. TIA. Bob
BobK Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

6/11/2007 9:47 PM	Rate (0)
jspino Posts: 37 Rating: (2)	I would recommend that you contact that RMA or Technical Support as the WinAC Slot 416 (V 3.4.1)is resetting and needs replaced.
jspino Posts: 37 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on