Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

op270b touch

Created by: tomus50 at: 6/17/2007 9:35 PM (2 Replies)

Rating (1)

Thanks 0

3 Entries

6/17/2007 9:35 PM	Rate (0)
tomus50 Experienced Member Joined: 6/3/2007 Last visit: 4/14/2022 Posts: 49 Rating: (0)	i missing something when trying to use the hmivia profibus. some setups i've seen with netpro the hmi is not even connected. i have no problems configuring mpi. is there a trick to it? thanks

Suggestion To thank Quote Answer

6/18/2007 12:48 PM	Rate (1)
Nemo Posts: 3149 Rating: (171)	Hi perhaps this FAQ is helpfull? http://support.automation.siemens.com/WW/view/en/13032411 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

6/18/2007 5:42 PM	Rate (0)
tomus50 Experienced Member Joined: 6/3/2007 Last visit: 4/14/2022 Posts: 49 Rating: (0)	very helpful! thank you

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on