Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

upgrade to WIN7 x64?

Created by: Ahmed Tawfik at: 9/3/2013 2:02 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/3/2013 2:02 PM	Rate (0)
Ahmed Tawfik Posts: 5 Rating: (1)	Dear All , has anybody succefully done the upgrade to WIN7 x64 ? where did you guys got the drivers for the CP 5611 ?
Ahmed Tawfik Posts: 5 Rating: (1)	Last edited by: Blue Moderator at: 9/3/2013 5:56 PM New subject after splitting from /tf/WW/en/Posts/77408#top
Suggestion To thank Quote Answer

9/4/2013 3:48 PM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 11/5/2024 Posts: 22431 Rating: (3029)	Hello, the x64 drivers for the CP5611 are delivered with STEP7 V5.5 SP1. Regards Christoph

Suggestion To thank Quote Answer

10/12/2013 8:48 AM	Rate (0)
jackdavis Posts: 1 Rating: (0)	I have tried to upgrade it, but it was showing me error. I don't understand how to upgrade it?
jackdavis Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

10/12/2013 9:14 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, What error did you get? Please make a printscreen (save as jpg)and attach it to your post. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on