Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMATIC Field PG / Interface S5/S5-PROMMER

Created by: Esgooa at: 4/23/2014 7:09 PM (4 Replies)

Rating (0)

Thanks 5

5 Entries

4/23/2014 7:09 PM	Rate (0)
Esgooa Posts: 2 Rating: (0)	Does anyone know the function of interface S5/S5-PROMMER on a SIMATIC Field PG? Do I need to buy STEP 5 License to use the interface? What is it for? Thanks for your answers.
Esgooa Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

4/29/2014 9:45 AM	Rate (0)
Martin472 Bronze Member Joined: 4/28/2009 Last visit: 9/16/2024 Posts: 347 Rating: (43)	Hello Esgooa, this interface is for writing programsto EPROM/EEPROM memory modules for S5 CPUs. There is EPROM handling function in Step5 to do this. In fact, if youdownload program fromStep5 softwareto S5 CPUs and you use EEPROM module,you don't need this function. When you have program in RAM, battery in CPU, you cancopy it to EEPROM directly on CPU without any other equipment. In case you are using EPROM module you have to write program only using Step5 EPROM handling function. Regards

Suggestion To thank Quote Answer

5/22/2014 5:00 PM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 10/23/2024 Posts: 4620 Rating: (708)	Esgooa S5/S5-PROMMER on a SIMATIC Field PG? Do I need to buy STEP 5 License to use the interface? Thanks for your answers. If you have Field PG also you have STEP 5 inside...

Suggestion To thank Quote Answer

5/22/2014 8:57 PM	Rate (0)
Navnag Platinum Member Joined: 11/21/2007 Last visit: 9/25/2024 Posts: 2325 Rating: (308)	Ste39 If you have Field PG also you have STEP 5 inside... Well not in all the field PGs .... Standard Version of the SIMATIC Field PG M4 Also Field PGs with Windows-7 cannot Run STEP5 .
	There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users IBN-Service Ayman Elotaify Ste39

5/23/2014 7:10 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (999)	Navnag Ste39 If you have Field PG also you have STEP 5 inside... Well not in all the field PGs .... Standard Version of the SIMATIC Field PG M4 Also Field PGs with Windows-7 cannot Run STEP5 . Exactly. You have to chances: Buy Multiboot PG - Version (expensive) or Use virtual machine, perhaps with some problems to go online.
IBN-Service Posts: 8946 Rating: (999)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Navnag muffi

|

Share this page:

Share this page on...

Follow us on