Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Wincc OA and S7-300

Created by: Ronald Pacco at: 12/2/2022 4:05 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/2/2022 4:05 PM	Rate (0)
Ronald Pacco Member Joined: 8/5/2015 Last visit: 12/2/2022 Posts: 1 Rating: (0)	Dear Support, Is it possible to link S7-300 via CP 343-1 to Wincc OA? Is there an specific manual that develops how to adquire tags from STEP7 program? Thanks RPH

Suggestion To thank Quote Answer

12/5/2022 4:12 PM	Rate (0)
Hazard_7 Advanced Member Joined: 5/30/2022 Last visit: 2/8/2023 Posts: 186 Rating: (44)	Hi Ronald Pacco, I think you will not have any problem, check this: Library of Basic Processes (LBP) V2.7 for TIA Portal V17 (STEP 7 Basic / Professional, WinCC Comfort / Professional, WinCC Runtime Advanced / Professional), WinCC V7.5 SP2 and WinCC Open Architecture 3.18 with documentation, libraries and demo projects Attachment 2022-10-18 16_09_01-Library of Basic Processes (LBP) V2.7 for TIA Portal V17 (STEP 7 Basic _ Profess (1).png (21 Downloads)
	If this information really helps, you could use the Rate function. Best Regards.
Suggestion To thank Quote Answer

12/6/2022 4:34 PM	Rate (0)
Gertjan van Schij... Advanced Member Joined: 6/23/2013 Last visit: 2/3/2023 Posts: 48 Rating: (2)	There is documentation available on how to configure the S7 driver on the WinCC OA site.
	WinCC OA specialist
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on