Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

Siemens PG710-386 With dead harddrive

Created by: Pro-Consult-AS at: 11/23/2011 10:33 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

11/23/2011 10:33 AM	Rate (0)
Pro-Consult-AS Posts: 1 Rating: (0)	Hi I have a 6EA1710-2DA11-0AA1 Siemens PG710-386 plus. The Harddrive has died and i have no diskettes or anything. Is there anyway to get a image for reinstallation, og any other way to get the software and OS to get it working again? -Rasmus Arndal Pro Consult A/S Denmark
Pro-Consult-AS Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

1/13/2012 8:58 AM	Rate (0)
Sensorik Advanced Member Joined: 3/8/2011 Last visit: 10/14/2024 Posts: 49 Rating: (4)	Hello Pro-Consult-AS, please contact the Siemens Technical Support. Maybee the Technical support can send you a restore for your PG710. Have a nice ay

Suggestion To thank Quote Answer

1/12/2018 6:59 PM	Rate (0)
AutoGen_1043218 Posts: 1 Rating: (0)	I also have a dead harddrive and no disks do you know where I can get a restore from?
AutoGen_1043218 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

1/13/2018 11:35 AM	Rate (0)
Duris_I Diamond Member Joined: 4/28/2015 Last visit: 10/30/2024 Posts: 10585 Rating: (825)	Hello, you can contact Siemens via Support request or your local Siemens representative for infos.
	With best regards... Ivan Duris Flight: OMICO
Suggestion To thank Quote Answer

1/2/2023 8:51 AM	Rate (0)
plcspace Member Joined: 3/6/2020 Last visit: 10/28/2024 Posts: 37 Rating: (0)	Mail from Siemens support: From: Siemens Industry Technical Support <support.automation@siemens.com> Sent: Wednesday, June 15, 2022 1:37 PM "Unfortunately, we can no longer offer anything for the PG710" Who have working PG710 Plus? I have, but hard disk not work. Could someone make image od hard drive ? Thx
	Last edited by: plcspace at: 01/02/2023 08:51:47
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on