Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

PLC AND SCADA DO NOT COMMUNICATE AGAIN AFTER REMOVING AND INSTALLING THE ETHERNET CABLE

Created by: AutoGen_3843954 at: 6/7/2024 7:58 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/7/2024 7:58 AM	Rate (0)
AutoGen_3843954 Joined: 1/14/2024 Last visit: 9/20/2024 Posts: 3 Rating: (0)	Hi Everyone, I have a project in Tia portal v.18.There are thirteen S7-1215 PLC's ,one S71511-1PN PLC in that project.And there is one PC Station for WinCC Runtime Professional Scada.The comminication is OK between S71215 plc's every situation but S71511 and WinCC runtime prof. do not comminicate after reboot plc S71511 or when ethernet cable connection is disconnected and pluged again. I ask for your help and suggestions. Best regards.

Suggestion To thank Quote Answer

6/14/2024 9:52 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/12/2024 Posts: 14153 Rating: (1772)	Hello AutoGen_3843954 do you use the latest Update for WinCC Runtime V18? https://support.industry.siemens.com/cs/de/en/view/109807225 Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on