Configure tp900 both ethernet ports

 Thank you so much sir.

S7 AUTOMAN

hi,

I dont see any attachments. Moreover these two ports in the comfort panel acts as an integrated switch(with same IP address). There is no point in connecting two cables with the two CPU's independantly(rather it can be used for connecting two redundant ethernet cables). You need to establish two connections from the two CPU's(two IP addresses) to the same panel(Single IP address) which you need to do as per the manual attached above.

In other words, the Single IP address(Two integrated port) of the comfort panel needs to communicate with two other CPU's IP ports. Since you can establish only one logical connection from the comfort panel to the CPU in programming you need to have an alternative way to communicate with the standby CPU of the H system. This you can achieve by using the methods described in the manual. Hope this helps

Dear team,

Subject : TP9000 comport panel fire server shared folder integration.

Any one knows about how to add network shared folder in the tp900 hmi and how to enable second ethernet port on tp9pp hmi