Navigation

connection issue when downloading to the HMI

Created by: yolcu69 at: 7/30/2024 9:48 AM (1 Replies)

7/30/2024 9:48 AM	Rate (0)
yolcu69 Member Joined: 6/28/2022 Last visit: 10/16/2024 Posts: 3 Rating: (0)	windfong Hi guys, I having a connection issue when downloading to the HMI, anyone know what is happening? Tia portal V16 , HMI TP900 comfort I solve with this. thank you *Check the settings of the PG/PC interface. Select your network card with TCPIP protocol.1.* ------------------------------------------------------------------------------------------ Split from Failed to establish connection with HMI.
	Last edited by: Moderator_Lan at: 07/31/2024 14:18:11 New subject after splitting Last edited by: Moderator_Lan at: 07/31/2024 14:20:30 Division of questions into separate topics
Suggestion To thank Quote Answer

7/31/2024 1:31 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/12/2024 Posts: 14153 Rating: (1772)	yolcu69 I solve with this. thank you *Check the settings of the PG/PC interface. Select your network card with TCPIP protocol.1.* Hello yolcu69 This has nothing to do with loading the HMI from TIA Portal. Back in WinCC flexible you had to set the PGPC Interface before loading the HMI but in TIA Portal if you want to load a Panel the settings that are set in the extended download dialog in TIA Portal is used for transfering the Data to the Panel. It is not important what you have set in the PGPC Interface settings in Control Panel in Windows. (for other tasks like simulation, Runtime comunication and other things is still important) So perhaps you had another situation as the author of this topic. Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer