Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

Stolen Simatic Fiield PG M

Created by: Miller at: 4/15/2007 10:35 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/15/2007 10:35 PM	Rate (0)
Miller Posts: 16 Rating: (0)	Dear All, I want to raise this issue with hopethat I may be able to retreivemy stolen Field PG M with rating plate number SVP U6015053. This PG has not been registered since its first commission becauseof itsexclusive use for STS Gantry Cranes with S7-400 control andtime to connect to the internet hasn't been yet done. I am asking anyone whohas an idea what Siemens site I will log in for help.Isearch from existing forum threads about this unique issue and found one the same. I hope you guys will have more suggestions with regards to this issue. Thanks and regards to all. Attachment 100_0215.JPG (660 Downloads)
Miller Posts: 16 Rating: (0)	Last edited by: Miller at: 19.04.2007 19:18
Suggestion To thank Quote Answer

5/13/2007 6:43 PM	Rate (0)
Late Platinum Member Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	Hi Miller, I'am sorry to hear that they have stolen the PG, but I don't know a page where you can give up the stolen PG. Do you have the yellow disks and the license apart of it? Then you can install it on a new PG so you don't have to buy that new. As long that kind of people are walking on the earth you have to be very carefull, a Kensington locker may be used, then is it not that easy to take the PG.
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

5/15/2007 12:04 AM	Rate (0)
Miller Posts: 16 Rating: (0)	Thanks for your answer buddy! This PG has the pre-installed S7 Simatic Manager, WinCC Flexibletrial version softwares, microWin_docu anddrive ES basic ( V5.4 ).Siemens provided us the floating licence S7 Simatic Manager V5.3 and licence WinCC Flexible2005. All licence softwares were intalled,such incidentwe also lost the licences. Right now we are opt to buy Fujitsu Siemens laptop as replacement for the stolen tool, howeverI need to buyadaptors for PCMIA to Profibus or MPI interfaces.As of this time,I haven't lost hope Ican still retrievemystolen tool.Anyway, an emailnotification fromSiemens technical forumposting this thread was sent to me through email. I hope this will help. Good day!
Miller Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

5/16/2007 2:25 AM	Rate (0)
GJohn Posts: 112 Rating: (10)	Try searching Ebay, this is where a lot of stolen goods aresold as our company recently found when a customers spare parts went missing.
GJohn Posts: 112 Rating: (10)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on