Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

hard disk failure in simatic 620 v2

Created by: crysak at: 5/7/2008 5:08 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/7/2008 5:08 AM	Rate (0)
crysak Posts: 2 Rating: (0)	hi all i have two simatic 620 v2 due to crash with the hard disk, i did a norton ghost image from anotherpc-panel (good one)all hard disk and put intowith a new hard disk, but windows not start, i did boot partition and nothing, press F5 and appear a windows menu, but no options works just appear a underscore line blinking. repair with a original windows cd and works fine put we have a problem with the drivers, i saw the other acu devices and appear a Twincat PNP Drivers: Twincat CP5613 PCI Driver. Twincat FC3102 PCI Driver. i don't have the first. i have various cd's (siemens panel 670 v2, panel 870 v2, documentation and drivers 04/2004) but that driver could not find it. you can help me?? you now why don't start windows XP?? always do images with norton ghost or drive image and never had a problem thanks, best regards.
crysak Posts: 2 Rating: (0)
Suggestion To thank

5/15/2008 3:04 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/14/2024 Posts: 4113 Rating: (195)	closed cause question posted twice The second thread with the subject simatic panel pc 620 6AV7613 v/s 6AV773 is published within the conference SIMATIC Panel. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on