Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

Broken Power-DVD installation

Created by: Darius at: 9/17/2008 2:43 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/17/2008 2:43 PM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 11/5/2024 Posts: 2957 Rating: (242)	Hello, Somehow I broked Power-DVD installation and want to reinstall it, but the only CDs that came with my Field-PG M was recovery CDs of entire operating system. So what should I do, how can I get Power DVD installation from them ? There was no separate installation disk of this software. Have you any ideas ?
	Best regards, Darius
Suggestion To thank Quote Answer

9/18/2008 2:38 AM	Rate (0)
legacy support Silver Member Joined: 7/15/2008 Last visit: 10/6/2024 Posts: 382 Rating: (44)	Hello Darius The Software you need for you DVD is from Cyberlink . www.CyberLink.com .

Suggestion To thank Quote Answer

9/18/2008 7:36 AM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 11/5/2024 Posts: 2957 Rating: (242)	Hi, That's correct, but I also need CD-key. I don't have it as long installation was integrated into recovery CD's.
	Best regards, Darius
Suggestion To thank Quote Answer

10/21/2008 9:21 AM	Rate (0)
Smurf Silver Member Joined: 9/28/2005 Last visit: 10/24/2024 Posts: 414 Rating: (28)	Hi, You could try Simatic Support for this or fill in the (copy of) the Quality control report which came with your FieldPG and send it to Siemens.
	Smurf "The only difference between a problem and a solution is that people understand the solution."
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on